Logo - Goldkist Goldkist - Bar

Zip® ATAPI drive
specifications

Zip ATAPI

Performance :

Average seek time: 29 milliseconds
Sustained transfer rate: up to 11.2 Mbits/sec (1.4 MB/sec)
Burst transfer rate: up to 26.7 Mbits/sec (3.3 MB/sec)
Typical throughput: up to 84MB/min
Rotational speed: 2941 RPM
Average start/stop time: 3 seconds
Long format time (surface verify): 10 minutes
Short format time: 10 seconds
Buffer size: 16K
Reliability and Service
MTBF: 100,000 hours
Service life: 5 years
Bit error rate: 1 in 10^12
Disk drop height/shock tolerance: 8ft/100Gs
Disk (estimated) shelf life: 10 years
Warranty-drive/media: 1 year/limited lifetime
General
Disk storage capacity: 100MB Zip® disks
Operating system compatibility: Windows* 95, Windows 98, Windows 3.1x, Windows NT, DOS
Interface: IDE (ATAPI)
External connections: 40-pin Ribbon Cable
Power requirements: 5V, 1 amp continuous, 1.7 amp peak
Acoustical noise (operating): Less than 35 dBA
Dimensions (LxWxH): 6.44" x 3.99" x 1.00"
(163.6mm x 101.4mm x 25.4mm)
Weight: 13.62oz (386.2gm)
Read/write protection: Via software (optional password protection)
Operating Conditions
Temperature
    Operating:
    Storage:
    Shipping:

10°C to 51°C
-22°C to 51°C
-40°C to 60°C
Relative humidity (non-condensing):
    Operating:
    Non-operational:

20% to 80%
10% to 90%
Vibration:
    Operational:

    Shipping:


0.4g @ 5-20Hz,
0.2g @ 20-250Hz
1.3g @ 5-27Hz,
2.0g @ 27-60Hz,
5.0g @ 60-500Hz
Shock @ 11ms duration
1/2 sine wave:
    operating:
    non-operational:

7g
100g

Altitude (operating): 10,000 feet maximum
(3,048m)

BACK | HOME