Product Specifications:
Wave-Table Synthesis
| E-mu Systems® EMU8000
wave-table synthesizer |
| Digital effects engine
for reverb, chorus, flange and delay |
| 32-voice polyphony and
multi-timbral capability |
| 128 GM & GS
compatible instruments and 10 drum kits |
| 16 MIDI channels |
| 1MB ROM of built in
sound samples |
Creative
WaveSynth/WG
| Physical modeling
WaveGuide technology and WaveSynth software based music
synthesis for highly expressive and natural sounding
music reproductions |
| Adds additional 32 voice
polyphony and multi-timbral capability |
Advanced
Audio Technology
| SoundFont®
down-loadable samples allow new sounds and musical
instruments to be added to the card |
| E-mu 3D Positional Audio
positions sound in a 360 (3D environment providing an
immersive audio experience with supported applications) |
| Creative 3D Stereo
Enhancement technology expands the spaciousness of sounds
in a traditional two speaker system |
| Hardware acceleration of
Microsoft® DirectSound games and applications. |
Memory
Subsystem
| 512K onboard RAM
supports SoundFont banks and E-mu 3D Positional Audio |
| Expandable up to 24MB of
RAM with memory upgrade modules |
CD-Quality,
16-Bit Stereo Digital Audio
| 8 and 16-bit, mono and
stereo recording and playback |
| User-selectable sample
rates from 5kHz to 44.1kHz |
| Full Duplex support
enables simultaneous record and playback for Internet
communications software |
MIDI Interface / Joystick Port
| Built-in 15-pin MIDI
interface (cable available separately) |
| Compatible with Sound
Blaster and MPU-401 UART modes |
| IBM® compatible 15-pin
joystick port with digital support |
On-Board Connectors
| Line-in |
| Microphone in |
| Line-out |
| 4 Watt amplified out |
| MPC-2 CD Audio in |
| MIDI/Joystick port |
Compatible with the Following Standards
| Windows 95 |
| Windows NT |
| Windows 3.1 |
| DOS 5.0 or higher |
| General MIDI |
| MPC3 |
| Plug and Play |
| Sound Blaster, Sound
Blaster Pro, Sound Blaster 16 and Sound Blaster AWE32 |
General
Specifications:
| Signal to Noise: Better
than 80 dB (A Weighted) |
| Frequency Response: 20
Hz-22 kHz (+0/-1 dB) |
| Environment Temperature:
(non-operating) -40C to 70C, (operating) 10C to 50C |
| Relative Humidity:
(non-operating) 30% to 95%, (operating) 30% to 80% |
| MTBF : >60,000 hours |
| Drop Test : 30cm above
concrete ground on all 6 sides |
| Vibration : Sine wave
for X,Y and Z axis (non-operating) 5Hz to 15Hz : 0.76mm (P-P) 5Hz to 25Hz : 1.5G 25Hz to 50Hz : 0.15mm (P-P) 50Hz to 100Hz : 3G |
| Year 2000 Compliant |